Dyno Run
Results 1 to 10 of 10

Thread: Dyno Run

  1. #1
    VidsCBR's Avatar
    Join Date
    Jul 2009
    Location
    Canberra Australia
    Posts
    363
    Member #
    884

    Dyno Run

    Gday Guys

    Ive had a dyno for my CB
    112.54 before mapping
    114.31 after mapping

    I have the PCV, its a modest increase in power, and yes it is noticible.
    However if i had my time again i wouldnt do it as the cost is considerable.
    The bike feels more smoother in all gears, although it chews more juice.
    I have to fill up fairly regularly, of course the guys i ride with they ride hard
    so bike gets a floggin..

    Anyhow just wanted to touch base that if you have the money save up and get some leathers
    or do some extra track days... IMHO..
    Thanks
    Vid


    " you can't control the wind, but you can adjust your sail "

  2. #2
    Banned blade's Avatar
    Join Date
    Aug 2010
    Posts
    6,335
    Member #
    1387
    Liked
    8 times

    Re: Dyno Run

    I,ve always said this,dynojet are clever they knew there jetting kits were coming to an end as everything is going FI so they flog this now instead which costs nothing to make as all electronic stuff does and charge more for it,never be buying one of these myself a new set of leathers sounds better




  3. #3
    Senior Member Giggity's Avatar
    Join Date
    Apr 2008
    Posts
    2,800
    Member #
    104
    Liked
    15 times

    Re: Dyno Run

    Even bigger racket is the NU IMPROOVED PC V and all the bolt on's. £££££££££
    Me Dyno man , bless him , wouldn't let me waste money so put in PC111 usb and custom map to get 122bhp/72tq
    Could have got more BHP, but dialed it down as I had to cross London now and then, didn't want to lose the sweet low speed handling.
    BTW, VID.......stock dyno run on yours is rather good. Seen 7 stock runs on 7 different CB's and yours is the best

    Ya got the stock Dyno chart ?

  4. Remove Advertisements
    HondaCB1000R.com
    Advertisements
     

  5. #4
    VidsCBR's Avatar
    Join Date
    Jul 2009
    Location
    Canberra Australia
    Posts
    363
    Member #
    884

    Re: Dyno Run

    Quote Originally Posted by Giggity
    Even bigger racket is the NU IMPROOVED PC V and all the bolt on's. £££££££££
    Me Dyno man , bless him , wouldn't let me waste money so put in PC111 usb and custom map to get 122bhp/72tq
    Could have got more BHP, but dialed it down as I had to cross London now and then, didn't want to lose the sweet low speed handling.
    BTW, VID.......stock dyno run on yours is rather good. Seen 7 stock runs on 7 different CB's and yours is the best

    Ya got the stock Dyno chart ?
    Yeah got the stock chart... it shows power curve slightly raised above normal.
    You can tell the bike is smoother in all the gears..
    AS smooth as Elle Mcpherson's pube patch...
    Thanks
    Vid


    " you can't control the wind, but you can adjust your sail "

  6. #5
    Senior Member Giggity's Avatar
    Join Date
    Apr 2008
    Posts
    2,800
    Member #
    104
    Liked
    15 times

    Re: Dyno Run

    Thanks Vid, but could ya give us a Lapdance......i.e take a pic of stock dyno printout so we can it

    That way we could add yours to the other seven , use a highly komplikathed mathumitacial foromula to get an average BHP/Torque of a standard CB : add the 8 sets of figures up and then ..erm...divide by eight.
    ( even me £15 Pay As Ya Hope fone has a camera ....of sorts )

    Ta muchley
    Gig......nuklear physisisist.

    May I state that I kno' nuthin about these LAPDANCE venues , wouldn't even know where to find one.
    e.g. The Flags in Chalvey, Pinks in Windsor or Pepermint Hippo near Slough
    Roofer told me about them

  7. #6
    Senior Member roofer's Avatar
    Join Date
    Sep 2008
    Location
    Up on the roof working as per:)
    Posts
    2,594
    Member #
    409
    Liked
    11 times

    Re: Dyno Run

    Quote Originally Posted by Giggity
    Thanks Vid, but could ya give us a Lapdance......i.e take a pic of stock dyno printout so we can it

    That way we could add yours to the other seven , use a highly komplikathed mathumitacial foromula to get an average BHP/Torque of a standard CB : add the 8 sets of figures up and then ..erm...divide by eight.
    ( even me £15 Pay As Ya Hope fone has a camera ....of sorts )

    Ta muchley
    Gig......nuklear physisisist.

    May I state that I kno' nuthin about these LAPDANCE venues , wouldn't even know where to find one.
    e.g. The Flags in Chalvey, Pinks in Windsor or Pepermint Hippo near Slough
    Roofer told me about them
    SHHHHH keep it under your hat Clive
    Today i mostly be...confused with the layout of this site!!!!!!

  8. #7
    Super Moderator lardy's Avatar
    Join Date
    Oct 2009
    Location
    Honiton, Devon
    Posts
    1,844
    Member #
    1008
    Liked
    24 times

    Re: Dyno Run

    Gargy know's something about pole dancing by all accounts! Bit like rain dancing but asking for poles instead
    Take a look at 'My Little Demon'

  9. #8
    Senior Member roofer's Avatar
    Join Date
    Sep 2008
    Location
    Up on the roof working as per:)
    Posts
    2,594
    Member #
    409
    Liked
    11 times

    Re: Dyno Run

    Quote Originally Posted by lardy
    Gargy know's something about pole dancing by all accounts! Bit like rain dancing but asking for poles instead
    Today i mostly be...confused with the layout of this site!!!!!!

  10. #9
    nzhelo's Avatar
    Join Date
    Nov 2010
    Posts
    22
    Member #
    1516

    Re: Dyno Run

    I will dig mine up tonight and post it tomorrow (if that helps anyone)

  11. #10
    Super Moderator lardy's Avatar
    Join Date
    Oct 2009
    Location
    Honiton, Devon
    Posts
    1,844
    Member #
    1008
    Liked
    24 times

    Re: Dyno Run

    Quote Originally Posted by nzhelo
    I will dig mine up tonight and post it tomorrow (if that helps anyone)
    What do you do bury everything in the garden to keep it secret
    Take a look at 'My Little Demon'

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Dyno comparisons
    By Dynojet UK in forum Dynojet UK
    Replies: 69
    Last Post: 09-28-2016, 12:51 PM
  2. DYNO
    By jon.f in forum CB1000R General
    Replies: 7
    Last Post: 04-19-2016, 10:06 AM
  3. Dyno Centre - Anyone Recommend a good Dyno Centre??????
    By chris noton in forum Modification
    Replies: 3
    Last Post: 02-22-2011, 12:51 PM
  4. Had my CB dyno'd
    By Thunderpants in forum CB1000R General
    Replies: 16
    Last Post: 05-01-2010, 01:40 PM
  5. Dyno Run
    By rda in forum Modification
    Replies: 17
    Last Post: 01-18-2009, 08:02 AM