r77d exhaust ,anyone fitted pc with this yet
Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Senior Member chrisg's Avatar
    Join Date
    Apr 2011
    Location
    Notts
    Posts
    594
    Member #
    1773
    Liked
    21 times

    r77d exhaust ,anyone fitted pc with this yet

    To all with r77d fitted has anyone also fitted pc to bike if so hows it running and what map are you using..cheers chris

  2. #2
    Senior Member timmy's Avatar
    Join Date
    Aug 2011
    Location
    Pa.
    Posts
    142
    Member #
    2031
    Liked
    1 times

    Re: r77d exhaust ,anyone fitted pc with this yet

    I'm running a PCV with my Yoshi r77d system and it runs way better than stock.I had a few fueling issues with mine right from the factory,surging and such,but no more of that. .I took mine to a dyno center and they made me a couple of maps for it.I didn't download any off the PC site.

  3. #3
    Member slowcoach's Avatar
    Join Date
    Mar 2011
    Location
    Saffron Walden
    Posts
    36
    Member #
    1725

    Re: r77d exhaust ,anyone fitted pc with this yet

    My Yoshi R77d is due to be delivered today, I will be looking for a suitable map too. I'm going to fit PCV with Autotune but need a close base map to start with, anyone fancy posting a map on here?

  4. Remove Advertisements
    HondaCB1000R.com
    Advertisements
     

  5. #4
    Senior Member chrisg's Avatar
    Join Date
    Apr 2011
    Location
    Notts
    Posts
    594
    Member #
    1773
    Liked
    21 times

    Re: r77d exhaust ,anyone fitted pc with this yet

    just ordered pcv from dynojet ,cheers for discount
    hey timmy any chance of posting your map files so i've got somewhere to start ...cheers

  6. #5
    Monza100's Avatar
    Join Date
    May 2011
    Location
    Sweden, ORG from UK.
    Posts
    116
    Member #
    1825

    Re: r77d exhaust ,anyone fitted pc with this yet

    Hi Chris , just installed my R77d also ,not tried it out yet so dont know if it 's running rich or anything but wondered on the PCV, can it be run with just a map installed which is suitable for that type of bike or must it be dynod for it to run right.

  7. #6
    Senior Member chrisg's Avatar
    Join Date
    Apr 2011
    Location
    Notts
    Posts
    594
    Member #
    1773
    Liked
    21 times

    Re: r77d exhaust ,anyone fitted pc with this yet

    in short mate ,i aint got a clue ..i repent my errors and bow down and admit that i'd be happier with bike when fueling has been sorted and smoothed back out .
    im hoping timmy can post something as a base to start from

  8. #7
    Senior Member timmy's Avatar
    Join Date
    Aug 2011
    Location
    Pa.
    Posts
    142
    Member #
    2031
    Liked
    1 times

    Re: r77d exhaust ,anyone fitted pc with this yet

    Chris...pm sent.


    I know they started with map #506,stock exhaust,cat removed.and went from there.It was lean across pretty much the whole range with that map,but I'm using U.S. fuel,so I'm not sure what the differences would be in Europe.

  9. #8
    Senior Member chrisg's Avatar
    Join Date
    Apr 2011
    Location
    Notts
    Posts
    594
    Member #
    1773
    Liked
    21 times

    Re: r77d exhaust ,anyone fitted pc with this yet

    Im off into the garage now to fit pc5 ,heavy handed diesel fitter trying to squeeze hands in fiddly tight spaces ..mmmmm its gunna be interesting

  10. #9
    Senior Member feckdeamon's Avatar
    Join Date
    Apr 2011
    Location
    Aberdeen
    Posts
    424
    Member #
    1783
    Liked
    17 times

    Re: r77d exhaust ,anyone fitted pc with this yet

    Chris - resist the temptation to use a hammer, whatever you do!

  11. #10
    Member slowcoach's Avatar
    Join Date
    Mar 2011
    Location
    Saffron Walden
    Posts
    36
    Member #
    1725

    Re: r77d exhaust ,anyone fitted pc with this yet

    Hi Chis,

    You gonna fir PCV now, can you do this and still keep stock map? I just fitted my yoshi r77d last night, sounds amazing I also have PCV but not installed yet as don't know if it wll f*ck up the fuelling without a base map to start with Intending to fit autotune to soon. Its levers and Gipro install today

    Slow

Page 1 of 2 12 LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Blue flame 3/4 exhaust fitted pics
    By yaxi in forum Modification
    Replies: 6
    Last Post: 03-03-2012, 08:47 AM
  2. Yoshimura R77D on CB1000R 2009
    By hondarul in forum Modification
    Replies: 4
    Last Post: 02-21-2012, 04:33 AM
  3. Yoshi R77D vs Standard can video comparison
    By KiThomas in forum Modification
    Replies: 42
    Last Post: 02-09-2012, 02:59 AM
  4. Replies: 3
    Last Post: 03-05-2011, 10:51 AM
  5. Exhaust Fitted
    By Rich 8 in forum Modification
    Replies: 1
    Last Post: 02-24-2011, 04:34 AM

Search tags for this page

cb 1000r r-77d
,
cb1000r yoshimura r77d autotune
,
does r77d eliminate cat
,

r77d exhaust

,
r77d install
Click on a term to search for related topics.