Help Needed - 08 CB1000R Pillion Steps Needed
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Junior Member MaverickPilot's Avatar
    Join Date
    May 2017
    Posts
    4
    Member #
    6993

    Help Needed - 08 CB1000R Pillion Steps Needed

    Hi All

    Recently I purchased an immaculate Cb1000R but unfortunately the owner had removed the rear pillion steps and is unable to locate them and the dealership refuses to pay for a replacement set even tho they agreed!!

    Unfortunately they are extremely rare in Australia and I can not locate 2nd hand/Wrecked bike to buy replacements. And genuine are WAAAAY to expensive to purchase and they are not in stock in Australia

    Any help would be greatly appreciated

    I have attached a photo from this forum (couldnt find good ones online) of what I need, mounting bolts would be handy aswell Name:  cb1000r step.jpg
Views: 121
Size:  95.6 KB


    regards

    Mav

  2. #2
    Member Chr0nik's Avatar
    Join Date
    Mar 2015
    Posts
    47
    Member #
    4079
    I will try to contact local wrecked bike yard, will let you know if they have something
    Honda CB1000R
    Honda CBR125R
    Malaguti Firefox F15

  3. #3
    Senior Member COLVERT's Avatar
    Join Date
    Nov 2009
    Location
    France
    Posts
    3,187
    Member #
    1038
    Liked
    714 times
    Your post may get results on this forum.
    There are lots of members who have removed the passenger pegs as they only ride solo.




    Also---------------Name:  Welcome from us.jpg
Views: 94
Size:  12.2 KB
    Last edited by COLVERT; 05-12-2017 at 08:23 AM.
    Personal Disclaimer:
    My thoughts are intended to provide a sounding board for your own.
    Some of what I say may go against your own thoughts and may seem harsh, targeted and malicious.
    This is not my intention – I am simply using my experience, including other peoples, as a way of debating and giving advice - of which there is no guarantee that it's correct

  4. Remove Advertisements
    HondaCB1000R.com
    Advertisements
     

  5. #4
    Junior Member LSUSYCO's Avatar
    Join Date
    Feb 2016
    Posts
    24
    Member #
    4868
    Hey my brother, coming to you from California. I have a set, brand new. taken off my bike two days after i purchased them. here is my private email. dlintzen@yahoo.com. I should have mounting bolts too. What would shipping be from California?
    Deron

  6. #5
    Senior Member BigOne-94-14's Avatar
    Join Date
    May 2014
    Location
    Silicon Valley, CA
    Posts
    1,315
    Member #
    3528
    Liked
    228 times
    Quote Originally Posted by LSUSYCO View Post
    what would shipping be from California?
    I went here and guessed the parcel would weigh 5 pounds

    https://www.myus.com/au/



    Name:  Screenshot_20170513-084917.png
Views: 82
Size:  142.6 KB

  7. #6
    Junior Member LSUSYCO's Avatar
    Join Date
    Feb 2016
    Posts
    24
    Member #
    4868
    I know I have them, and they are in new condition. There may be a flat rate shipping option thats cheaper, let me look. I will verify I have the bolts too. I will need a few days. I'm working out of town the next three days. What do you think is fair price?

  8. #7
    Senior Member COLVERT's Avatar
    Join Date
    Nov 2009
    Location
    France
    Posts
    3,187
    Member #
    1038
    Liked
    714 times
    Quote Originally Posted by MaverickPilot View Post
    Hi All

    Recently I purchased an immaculate Cb1000R but unfortunately the owner had removed the rear pillion steps and is unable to locate them and the dealership refuses to pay for a replacement set even tho they agreed!!

    Unfortunately they are extremely rare in Australia and I can not locate 2nd hand/Wrecked bike to buy replacements. And genuine are WAAAAY to expensive to purchase and they are not in stock in Australia

    Any help would be greatly appreciated

    I have attached a photo from this forum (couldnt find good ones online) of what I need, mounting bolts would be handy aswell Name:  cb1000r step.jpg
Views: 121
Size:  95.6 KB


    regards

    Mav
    Where are you ????---You have some replies.-----
    Personal Disclaimer:
    My thoughts are intended to provide a sounding board for your own.
    Some of what I say may go against your own thoughts and may seem harsh, targeted and malicious.
    This is not my intention – I am simply using my experience, including other peoples, as a way of debating and giving advice - of which there is no guarantee that it's correct

  9. #8
    Junior Member MaverickPilot's Avatar
    Join Date
    May 2017
    Posts
    4
    Member #
    6993
    Hi Colvert, I have emailed LSUSYCO directly

  10. #9
    Junior Member LSUSYCO's Avatar
    Join Date
    Feb 2016
    Posts
    24
    Member #
    4868
    Hello MaverickPilot

    I should know tomorrow if I have the rear for foot rest. Just fyi, they are silver but I'm sure you could easily powder coat them any color. I would only ask $20.00 dollars for them and you pay for shipping. I do not have the bolts but I could go buy them and let you know how much it cost? let me know if i can help you further?

  11. #10
    Junior Member MaverickPilot's Avatar
    Join Date
    May 2017
    Posts
    4
    Member #
    6993
    Bolts arent so major i may find them her in Aus and colour doesnt bother me at all, can you give me rough measurements and rough weight so I can price shipping

Page 1 of 2 12 LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. rear pillion seat needed asap
    By minibreaker in forum Marketplace
    Replies: 3
    Last Post: 05-13-2015, 05:11 PM
  2. Replies: 12
    Last Post: 04-27-2014, 05:26 AM
  3. Help needed.
    By hondafan in forum Modification
    Replies: 10
    Last Post: 04-13-2014, 11:40 AM
  4. Help needed
    By Tankie in forum CB1000R General
    Replies: 14
    Last Post: 03-13-2011, 10:41 PM
  5. CB1000R needed to fabricate Racefit Growler Exhaust
    By RBD914 in forum Modification
    Replies: 14
    Last Post: 11-28-2009, 03:28 AM